Clone a CD in Linux with wodim

Here's the content of my ~/bin/copycd:

function getkey()
{
    read yourentry
}
DEV=/dev/scd0
TMP_FILE=/tmp/cd_data.raw
echo Please enter the CD/DVD to copy from ....
getkey

readom dev=${DEV} -nocorr f=${TMP_FILE}
echo Please enter a blank CD/DVD and press enter when ready ....
getkey

#readom dev=${DEV} -w -nocorr f=${TMP_FILE}
wodim dev=${DEV} -setdropts driveropts=singlesession
wodim dev=${DEV} -dao -v ${TMP_FILE}


wodim -eject

Why VirtualBox is better

I'd tried to load up QEMU or Xen with no success on my OpenSUSE 64-bit ver 10.3 (I am running kernel version 2.6.25).  I then tried VirtualBox OSE (Open Source Edition) downloadable from www.virtualbox.de.  After installing all the needed libraries as instructed and compiled this VB, it worked as charm!

With QEMU or Xen, there were problems I couldn't fix (this because my Linux is heavily customized and not running kernel from openSuSE anymore).  I also tried the pre-compiled (proprietary/non-OSE) version, and this actually even better.  As mentioned on the website, the proprietary version supports USB and file sharing between host and guest O/S.

So far, I am able to run my Windows XP Pro SP3 under this Linux 64-bit with no problem.  I could print, browse internet and even play games (eventhough it is slower than running in native/standalon XP).  With file sharing, I could install Microsoft Office in the guest O/S and share the doc/xls/ppt files.

For the networking, the VB provides a firewall and NAT.  The subnet it gives is in 10.x.x.x subnet, but work with no issues. 

I still have small issue though as the screen resolution under XP is limited to 1024x968, eventhough the host O/S (Linux) has nvidia driver and was running resolution 1680x1050.  But interestingly, on my MacBook running OSX 10.4 Tiger, I could set the screen resolution as much as 1680x1050 (which is even beyond my laptop resolution).  Why?

With Windows XP as host O/S, I initially tried Microsoft Virtual PC.  The interface is good, but when I installed Linux OpenSUSE 10.3 (32-bit), the network worked sporadically and took almost a week to download necessary modules from opensuse.org!   I tried installed offline, the same issue happened.

After this painful waiting, finally I managed to install it, but everytime I rebooted the guest O/S it never came up correctly (the screen stayed blank after the initial OpenSUSE login screen).  I eventually dumped this stupid Virtualization tool completely and install VirtualBox.  Yes, as you might guess, it works like a charm on Windows XP too.  

I still need to try on Windows Vista though.  Will report it later.

What a tool!

Some Cool Freewares

• Clam AntiVirus for Unix: http://www.clamav.org/download/
• Fast SCP: http://www.veeam.com/download.asp?step=2&license_type=7
• Kismet L2 Wireless Network Detector: http://www.kismetwireless.net/download.shtml
• Kiwi Syslog monitor for Windows: http://www.kiwisyslog.com/kiwi-syslog-daemon-download/
• Multi Router Traffic Grapher (MRTG): http://oss.oetiker.ch/mrtg/download.en.html
• Nagios Monitor (NetSaint): http://www.nagios.org/download/
• NMAP Network Scanner: http://nmap.org/download.html
• NTOP Traffic Probe: http://www.ntop.org/download.html
• OpenNMS: http://www.opennms.org/index.php/New_and_Noteworthy#Download
• PingPlotter: http://www.pingplotter.com/freeware.html
• Putty a Windows SSH: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
• Scrutinizer Traffic Monitor: http://www.plixer.com/support/download_request.php
• SNORT: http://www.snort.org/dl/
• UltraVNC: http://www.uvnc.com/download/index.html
• WireShark (formerly Ethereal): http://www.wireshark.org/download.html
• ZipTie: http://www.ziptie.org/download
• VirtualBox (Virtualization on Multi OSs): http://www.virtualbox.org/wiki/Downloads

VirtualBox 1.5.6 with Linux Kernel 2.6.25

While compiling VirtualBox was successful, the loading failed with kernel message (seen using dmesg | tail -f):

release/bin/src ; USER=root ; COMMAND=/sbin/modprobe vboxdrv
Apr 23 22:20:16 linux-hp kernel: vboxdrv: Unknown symbol change_page_attr


With the introduction of the new API, no driver nor non-archcore code needs to use change_page_attr anymore. What I did was to grep for "change_page_attr" in VirtualBox source directory:

grep -R --include=*.? "change_page_attr"

And comment out all calls to this procedure. Loading the module then succeeded:

release/bin/src ; USER=root ; COMMAND=/sbin/modprobe vboxdrv
Apr 23 22:27:53 linux-hp kernel: vboxdrv: Trying to deactivate the NMI watchdog permanently...
Apr 23 22:27:53 linux-hp kernel: vboxdrv: Successfully done.
Apr 23 22:27:53 linux-hp kernel: vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Apr 23 22:27:53 linux-hp kernel: vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).

Canon 4200F is still unsupported on Linux

lsusb -d 04a9:221b -vvv

lsusb -d 04a9:221b -vvv

Bus 007 Device 002: ID 04a9:221b Canon, Inc.
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass          255 Vendor Specific Class
 bDeviceSubClass       255 Vendor Specific Subclass
 bDeviceProtocol       255 Vendor Specific Protocol
 bMaxPacketSize0        64
 idVendor           0x04a9 Canon, Inc.
 idProduct          0x221b
 bcdDevice            2.00
 iManufacturer           3 Canon
 iProduct                4 CanoScan
 iSerial                 0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           39
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xc0
     Self Powered
   MaxPower               10mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           3
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x02  EP 2 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x83  EP 3 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0001  1x 1 bytes
       bInterval               8
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass          255 Vendor Specific Class
 bDeviceSubClass       255 Vendor Specific Subclass
 bDeviceProtocol       255 Vendor Specific Protocol
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0001
 Self Powered

Creative XFi driver on Linux 2.6.25

There is still a problem with beta2 version of Creative Sound Blaster XFi driver on Linux kernel 2.6.25. If we do what is said by the driver installation instruction, it ends up with some errors. Here's a trick how to manually compile and install it:

1. Download the driver from http://us.creative.com/support/downloads/download.asp?searchString=XFiDrv_Linux. or directly from shell: wget http://ccftp.creative.com/manualdn/Drivers/AVP/10530/0xE84AB36F/XFiDrv_Linux_US-1.18.tar.gz
   The latest is version 1.18


2. Extract the tar.gz file from your build folder:
   
   tar zxvf XFiDrv_Linux_US-1.18.tar.gz
   
   This will extract all files to XFiDrv_Linux_US-1.18
   
3. cd to the XFiDrv_Linux_US-1.18/drivers
4. Try to do make (gotta be a root). It will cause some errors (the errors don't appear on the screen. They are logged in /var/log/creative-installer.log and need root access to see it). We can open another window/shell and just type: sudo tail -f /var/log/creative-installer.log to see what's going on.
5. OK, now we're about to fix these problems. First, just typ: ./configure
6. Don't do make yet. We need to modify some files.
7. edit file LinuxSys.c: vi src/ossrv/LinuxSys.c
Goto line 648 and replace SA_SHIRQ with IRQF_SHARED (Kernel 2.6.22 has told us that it was going to deprecate it although still defines it, but in kernel 2.6.25 this SA_SHIRQ is now gone!)

8. Add the following line after line 33:


#include <linux/fs.h> // for definitions of filp_*

9. Add the following lines after line 37:
   
   #include <asm-generic/fcntl.h> // otherwise, some MACROS are undefined
   
   


10. Compile with the following command: sudo make KBUILD_NOPEDANTIC=1 or modify (temporarily!) file /usr/src/linux/scripts/Makefile.build and comment out statements around line 46 as below:



 #ifeq ($(KBUILD_NOPEDANTIC),)
  #ifneq ("$(save-cflags)","$(CFLAGS)")
       #$(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS)
#endif



11. Edit file in drivers/ctsound and change the order to:
    
    
    

    drivers="ctossrv emupia ctsfman haxfi ctalsa ct20xut ctexfifx cthwiut"
    

    
    
    #endif
12. Install it: sudo make install